Category: Vacuum/Dust Extraction

900DE The original, often imitated, ‘mud hog’ sander. Vacuum model for use with most central vac & portable vac systems. 8"gear driven pad Fast, controllable stock removal Great for leveling & spotting high & low spots. Optional T-Handle motor cover available.

1100DE Compact, straight-line powerhouse. Works with most central vac & portable shop vac systems. Features second hand grip. Tough polymer pad shoe won’t damage trim when working up close. Great for wet sanding

2200DE This mini-file board sander features a 3/16" orbital stroke for aggressive, yet highly controllable sanding. The ergonomics of this unique tool are perfect for today's sanding needs. Simple one or two-handed operation, non-marring shoe pad & powerful yet quiet motor all add up to higher productivity. Works with most central vac & portable shop vac systems.

9600DE Smaller version of the 8"‘mud hog’ sander. Operates with either a 5"or 6"pad. Aggressive enough for knock down, yet enough finesse for feather edging. Optional T-Handle motor cover available. Works with most central vac & portable shop vac systems. ( NOTE: Dust Extraction holes only available on 6" pad.)

9900DE Excels at both sanding & buffing. 6" gear driven rotating/oscillating pad. Strips to bare metal 3 times faster than other sanders. Buffs clear coat repairs in half the time of an electric buffer. Eliminates swirl marks. Works with most central vac & portable vac systems.

DA-DE The original sander that coined the term "DA". The Model DA has a unique drive geometry that results in an aggressive interrupted contact of the abrasive to the work surface. Since the pad is always changing plane, the abrasive does not load up and heat generation is minimized, resulting in longer abrasive life. Works with 4", 5" or 6" pad sizes. Available with your choice of pad. Features a 3/8" orbit. Works with most central vac & portable shop vac systems.

DAQ-DE The original version of the most copied air sander in the world. The Model DAQ is the quieter version of the DA. It features extra muffling and a tough polypropylene motor cover that provides a comfortable hand hold. The DAQ meets all current OSHA noise level requirements. An accessory T-handle motor cover (P/N 3730) is also available for enhanced ergonomics in two-handed operation. Works with 5" or 6" pad sizes. Available with your choice of pad. Works with most central vac or portable shop vac systems.

EZLS-DE The Model EZLS, evolutionary cousin of the DAQ, features the same 3/8" orbit, without the ‘wobble’ action of the DAQ It features a smoother action, enhanced ergonomics with a longer soft grip handle, lighter weight and quieter operation than the DAQ. The EZLS excels in smooth, aggressive sanding, especially when working on thin, unsupported metal. The EZLS is also available with an optional T-Handle cover (P/N 3771) for more controlled two handed sanding. The vacuum model works with a 5", or 6" pad. Comes with your choice of pad, specify when ordering.. The EZLS is also available with Dust-Extraction for 5" or 6" pads (Model EZLS-DE).

EZQ-DE The EZQ combines dual action sanding with design features that allow the pad to operate flat on the work surface. With its 3/16" orbit and lighter weight, unparalleled smoothness is the result, even on thin, unsupported metal, plastic, fiberglass and other surfaces. The exceptionally smooth operation makes the EZQ easy to master, from controlled stock removal, to fine finishing, with today’s micro-fine abrasives. An accessory T-handle motor cover (P/N 3771) is also available for enhanced ergonomics. The Dust Extraction model is available with either a 5" or 6" pad. Works with most central vac or portable shop vac systms. Comes standard with your choice of pad, specify when ordering.

HD-8 DE The Model HD-8 is an 8" random orbital sander developed for sanding large, flat areas. It features a double row orbit bearing for long life, rigid construction and a 5 point pad attachment that allows complete use of the abrasive. The foam grips enhance ergonomics and greatly increase operator comfort. Available with vinyl or hook & loop pad, specify when ordering. Works with central vac or portable shop vac systems.

PG-8DE The Model PG-8 incorporates the comfortable, lightweight Palm design with an 8 inch pad traditionally seen on 2-handed tools. One handed sanding allows for better control for flat sanding and helps eliminate sanding 'scallops' on wood & fiberglass due to uneven pressure applied to the tool. The PG-8 has a 5 point mounting & Double row head bearing for the durability you expect from a National Detroit tool. Works with most central & portable shop vacuum systems to give you the ultimate in dust-free sanding.

PGU-5DE NEW! 5" Palm Sander with Dust Extraction, 3/16" Stroke for general sanding needs. National Detroit introduces a brand new 5" Palm Sander with Dust Extraction for use with most central & portable shop vacuums. The new PGU-5DE sets the standard for what dust extraction should be on a palm sander, giving you a virtually dust free surface & work environment. Can work with both 5" & 6" pads. Also features a new & improved 12,000 rpm motor and the quality and durability you expect from National Detroit.

PGU-6DE NEW! 6" Palm Sander with Dust Extraction, 3/16" Stroke for general sanding needs. National Detroit introduces a brand new 6" Palm Sander with Dust Extraction for use with most central & portable shop vacuums. The new PGU-6DE sets the standard for what dust extraction should be on a palm sander, giving you a virtually dust free surface & work environment. Also features a new & improved 12,000 rpm motor and the quality and durability you expect from National Detroit.

PGSS-5DE NEW! 5" Palm Sander with Dust Extraction, 3/32" Stroke for fine finishing. National Detroit introduces a brand new 5" Palm Sander with Dust Extraction for use with most central & portable shop vacuums. The new PGSS-5DE sets the standard for what dust extraction should be on a palm sander, giving you a virtually dust free surface & work environment. Can work with both 5" & 6" pads. Also features a new & improved 12,000 rpm motor and the quality and durability you expect from National Detroit.

PGSS-6DE NEW! 6" Palm Sander with Dust Extraction, 3/32" Stroke for fine finishing. National Detroit introduces a brand new 6" Palm Sander with Dust Extraction for use with most central & portable shop vacuums. The new PGSS-6DE sets the standard for what dust extraction should be on a palm sander, giving you a virtually dust free surface & work environment. Also features a new & improved 12,000 rpm motor and the quality and durability you expect from National Detroit.